*Important Note: Registration is required for use of your V350. You may use your V350 five times only before you must register your free membership!
Step 1. Install Sonocaddie V350 Series Software
1. Follow the instructions on setup wizard to finish the installation.
2. Once the installation has finished, please go to the desktop and click
on the Sonocaddie V350 icon.
Step 2. Register Your Membership & Unlock Unit
*Note: You may use your V350 five times before you must register your membership. After five uses the V350 unit will be locked and remain in locked status until your registration is completed. To register and unlock V350 please follow the instructions below.
1. After the software has been updated, please complete the Membeship Registration form on screen.
The email address you entered will be your login ID. (Note: Product serial number underneath the battery is required for the registration.)
2. When Sonocaddie Login Screen appears, please power up V350 unit and connect it to your computer with USB cable.
3. Log into the software with your email address & password, and the V350 Series Management Screen will soon appear.
4. All registration and unit unlock process will have been successfully completed when you see the bar running between the graphics of device and PC.
Step 3. Download Your Course Layouts
1. Please click the SonoCourse tab and search the course by its location or name.
2. Check the box beside the course(s) and click “Download”, the course(s) will appear in “My Course”. It will take few minutes for this process.
Home
